So, the space has this clock, right?
I'm modifying it to be visible at night.
 Stage 1
- Installing the LEDs
- Building the LED driver
- Building a wiring harness
- Connecting it all to an arduino
There are 6 LEDs in a circle, with a green one at the top. On a white wall, the clock hands and markers are easily visible thanks to diffusion.
 Wiring Harness
The LEDs are numbered from 0-5, moving clockwise and starting at 2 o'clock.
- 0 - Pin 3
- 1 - Pin 5
- 2 - Pin 6
- 3 - Pin 9
- 4 - Pin 10
 Stage 2
Basically, a total redesign of the control system. I want it to use NTP